Live Video - See our 400 Amp Jump Starter Start a Car



IAN: Hi this is Ian from iTechworld, today we are going to look at our new 400 cold cranking amp jumpstarter. A lot of people have seen the previous video and wanted to see one of these in action. So we have spent all morning draining the battery from one of the worker’s here car. If you have a look we have drained it down to just about 11 volts. What we are going to do now is put the jump starter on and start it up. So first of all, we connect the cable to the battery. And then we connect the cables to the unit. (Phil starts the car) Easy! Once you have started it you remove the cables.  Now it’s jumped up to 13.4 volts. And that's how you use the iTechworld Jump Starter!



No comments yet.

Please note: comments must be approved before they are published.