iTECH120 120AH 12 Volt Lithium Battery
The iTECH120 has been replaced with the iTECH120X see details HERE
Every now and then, a technological breakthrough occurs that has a major impact on the Australian recreational vehicle industry. One such breakthrough that is creating a lot of buzz and excitement is the iTECH120 lithium battery. The new 2020 iTECH120 is a 120 Amp Hour lithium battery that has been designed and developed by Australian, family-owned and operated company iTechworld. Currently, lead-acid RV batteries dominate the market in Australia, but there’s a superior alternative to these traditional heavy batteries. That alternative is the iTECH120. Older tech Lithium batteries have been around for years, but the technology has never been up to the standard of the iTECH120. The biggest issue with older lithium being that a specialised charger was required to re-charge. The design and development team at iTechworld have studied the market and we have manufactured the most advanced battery available anywhere in the world. As we are proudly Australian we have used lithium sourced in Western Australia for our iTECH120.
The main benefit of the iTECH120 is that it weighs considerably less than your existing lead-acid batteries. Most 120 Amp Hour deep cycle batteries weigh upwards of 30kg the iTECH120 lithium battery weighs just 13kg, yes you did read that correctly, just 13kg! Three years of development on the iTECH120 has enabled us to pre-install each battery with the most up to date Battery Management Systems that are designed specifically to operate in the harsh Australian conditions. This is what sets the iTECH120 in a class of its own, the Redback™️ Lithium Operating System has been patented and is exclusive to iTechworld The iTECH120 is the only lithium battery suitable for inverter use as it has an extremely large discharge current, you can pull a massive 280 Amps from the iTECH120, most other lithium batteries only let you take approx 50 Amps making them almost useless. The Redback™️ Lithium Operating System has been designed specifically for the demanding Australian market. This internal technology allows you to hook up to 4 iTECH120 batteries together in parallel or series. The pre-installed internal technology also allows you to use existing charging systems such as battery chargers and solar panels.
No changing of systems, equipment, or extensive re-wiring is required in most cases. You simply pull your old heavy batteries out (if your back allows it) and put the new lightweight iTECH120 in. It’s as easy as that. The iTECH120 is the only true drop-in upgrade for your existing old and heavy batteries, in most cases. One iTECH120 battery is the equivalent to around 200AH in lead-acid. You are probably already familiar with the tedious process of replacing a lead-acid battery once every two or three years. This is a thing of the past as an investment in an iTECH120 battery will give you a much more modern, clean, and lightweight power source that can do 4 times as many cycles as your lead acid battery. A cycle is how battery life is measured each cycle is measured as one full discharge and then one full re-charge of a battery. A standard lead-acid battery can cycle approx. 500 times. The ITECH120 can do approx. 2000 times. The iTECH120 is the only lithium battery with true 280A maximum discharge. The iTECH120 is the only lithium battery in the world with the Redback™️ Lithium Operating System installed as standard. This is the heartbeat of the battery and makes it the only true drop-in upgrade lithium battery in most cases.
FEATURES for 2020 ITECH120:
Heavy duty case
Can be connected in parallel(up to 4)
Can be connected in series (up to 2)
High discharge current max 300A
Heavy-duty removable M8 Bolt Battery terminals
Lifting handle fitted to ensure a secure hold when moving
Inbuilt battery management system
Redback™️ Lithium Operating System installed as standard.
Built-in over-discharge protection.
SPECIFICATIONS for 2020:
Nominal Voltage: 12.8v
Charging Voltage: 14.7v or less
Automatic discharge cut off Voltage: 10v
Standard discharge current: 130A
Max discharge current: 300A
Standard charge current: 50A
Maximum charge current: 100A
Output connector: M8 Stud
This battery is not waterproof. IP50.
Weight: 13kg each
Dimensions: 330x173x215mm . (LxWxH) per unit (Height 225mm including terminals)
Optimal charge temp range: 0°c to + 45°c
Optimal discharge temp range: -20°c to + 60°c
Optimal storage temp: -10°c to + 45°c
Uses standard M8 Studs
Specifications subject to change without notice.
PACKAGE CONTENTS for 2020:
1x 120AH 12V Lithium Battery
Pre-installed Redback™️ Lithium Operating System
The statutory warranty is 36 months from the date of purchase.
Storage deep cycle battery only. It cannot be used as a cranking battery.
iTECH120 voltage chart and discharge curve for 2020 HERE
iTECH120 specifications sheet for 2020 HERE
iTECH120 Warranty information for 2020 HERE
Setting up your non-iTechworld charging system for an iTECH120 2020 HERE
If your iTECH120 battery has gone into safe mode please follow the instructions HERE
We recommend using the iTechworld lithium bypass switch to bring lithium batteries out of safe mode HERE
Related productsview more items