1300CCA 12 Volt Lithium Stop Start Cranking Car Battery 60Ah.
All-new iTECH1420 Pro utilises the most extensive and robust Battery Management System (BMS) in any iTechworld battery produced to date. This extra power is beneficial for heavy-duty and commercial applications; extreme winching over and above standard 4WD applications is now a breeze thanks to the iTECH1420 Pro.
The iTECH1420CA PRO comes with the negative terminals on the left, as shown in the image.
iTechworld have developed in Australia a new lithium battery specific for the Australian market, its called the ITECH1420CA PRO. Battery break-through technology creating a lot of buzz and excitement. The iTECH1420CA PRO is a 60 Amp Hour lithium battery designed and developed by an Australian, family-owned and operated company, iTechworld. Lead-acid batteries dominate the car starting market now there’s a superior alternative to leadacid heavy batteries. That alternative is the iTECH1420CA PRO. New technology lighter more powerful lithium batteries to start cars, 4WD's, boats and more. The biggest issue with older lithium battery technology is that they required a specialised charger. These still do but they can be also changed from a car alternator. The R&D team at iTechworld have studied the market and have brought the most advanced lithium cranking battery available anywhere in the world. The iTECH1420CA PRO.
The iTECH1420CA PRO weighs considerably less than your existing lead-acid batteries. Equivalent in capacity to a 120 Amp Hour lead-acid battery that weighs upwards of 30kg, the iTECH1420CA PRO lithium battery weighs just 8kg. Years of development, the iTECH1420CA PRO has enabled iTechworld to pre-install advanced battery technology into each unit. Sets the iTECH1420CA PRO in a class of its own.
The iTECH1420CA PRO is one of the few lithium batteries in the world able to produce this high amount of power suitable for cranking use. It can deliver up to massive 1500 Cranking Amps. This Australian technology allows you to deliver this amount of cranking power. The pre-installed internal technology also allows you to use existing charging systems such as car alternators, lithium battery chargers and solar panels with lithium profile regulators.
You can simply remove your old heavy battery and put the new lightweight iTECH1420CA PRO in its place. It’s as easy as that. The iTECH1420CA PRO is one of the only drop-in upgrades for your existing old and heavy lead-acid battery. One iTECH1420CA PRO lithium battery is equivalent to 120AH in lead-acid in capacity. You are probably already familiar with the tedious process of replacing a lead-acid battery once every two or three years. This is a thing of the past as an investment in an iTECH1420CA PRO lithium battery will give you a much more, clean and lightweight power source that can do up to 5 times as many cycles as your lead acid battery. A cycle is how battery life is measured. Each cycle one full discharge and then one full re-charge of a battery. A standard lead-acid battery can cycle approx. 500 times. The iTECH1420CA PRO can cycle approx. 2000 times. The iTECH1420CA PRO is the only lithium battery with 1500 Cranking Amps that we know off.
Built for high discharge applications such as extreme winching applications. Please follow the manufactures recommended instructions when using a winch. Usually, it's 10sec on and 30sec rest, then repeat.
The only Lithium-Ion Batteries that can be charged using a normal 12V car alternator and lithium battery charger.
The latest Operating System allows a series connection of 2 batteries for 24V applications.
NOT SUITABLE for 36V or 48V applications.
Heavy duty case
High discharge current 1500 Cranking Amps
Heavy-duty battery terminals
Lifting handle fitted to ensure a secure hold when moving
iTechworld Battery Management System installed as standard.
Nominal Voltage: 12.8v
Max discharge current or Cranking Amps : 1500CA ( <5sec )
Cold Cranking amps 1300CCA ( At -20C )
Standard discharge current: less than 400A
Charging Voltage: 14.7v or less
Discharge cut off Voltage: 8v
Standard charge current: less than 80A
Max charge current 300A
Usable capacity 60Ah
Case material ABS
IP Rating is IP67
Life cycles 2000
Vehicle post terminals
Dimensions: L*W*H 280*176*190mm ( Height including terminals )
Optimal working temp range: -20°c to + 80°c
* Please note specifications can change at any time.
1x iTECH1420CA PRO 12V Lithium Cranking Battery
1x independent test report
Pre-installed Battery Management System.
If your iTechworld battery enters safe mode, please follow the instructions HERE
The statutory warranty is 24 months from the date of purchase.