420CCA 12 Volt Lithium Stop Start Cranking Battery 6Ah.

The all-new iTECH420CA S lithium battery has been designed and developed within Australia, purpose-built for the harsh Australian climate. 

Currently, lead-acid batteries dominate the car starting market around the world. But there's a superior alternative to these traditional heavy batteries. That alternative is the iTECH420CA S. This new technology developed by iTechworld allows the use of lighter, more powerful lithium batteries to start motorbikes.

The design and development team at iTechworld have been studying the market for over 10 years. They have brought together the most advanced lithium cranking battery range available anywhere in the world.

The iTECH420CA S lithium battery weighs just 1.3kg; yes, you read that correctly, just 1.3kg. The iTECH420CA S weighs considerably less than your existing lead-acid batteries. Years of development on the iTECH420CA S has enabled iTechworld to pre-install advanced battery technology into each unit. This is what sets iTechworld's lithium cranking battery range in a class of its own.

 Weighing in at only 1.3kg, the iTECH420CA S can produce an immense amount of power suitable for cranking use. It can deliver up to a massive 420 Cold Cranking Amps. The Battery Management System in each iTechworld battery has been designed specifically for the demanding Australian market. This internal technology allows you to deliver such an impressive cranking power. The pre-installed internal technology also allows you to use existing charging systems such as motorbike alternators, lithium battery chargers and solar panels with lithium profile regulators.

You are probably already familiar with the tedious process of replacing a lead-acid battery once every two or three years. This is a thing of the past as an investment in an iTECH420CA S lithium battery will give you a much more clean and lightweight power source that can perform up to 5 times as many cycles as your lead acid battery. One cycle is measured as one full discharge and then one full re-charge of a battery. A standard lead-acid battery can cycle approx. 500 times. The iTECH420CA S can cycle approx. 2000 times. 

The only Lithium-Ion Batteries that can be charged using a standard 12V alternator and lithium battery charger.

The latest Operating System allows a series connection of 2 batteries for 24V applications.

NOT SUITABLE for 36V or 48V applications.

FEATURES:

Heavy duty case

High discharge current 420 Cranking Amps

Heavy-duty battery terminals

Maintenance-free

Lithium-ion

Lifting handle fitted to ensure a secure hold when moving

iTechworld Battery Management System installed as standard.

Over-discharge protection

SPECIFICATIONS*:

Nominal Voltage: 12.8v

Cold Cranking amps 420CCA ( At -20C )

Discharge cut off voltage: 8v

Usable capacity 6Ah

Max charge current 6A

Recommended charge current 3A

Case material ABS

IP Rating is IP67

Life cycles 2000

Vehicle post terminals

Weight: 1.3kg 

Dimensions: L*W*H 148*65*92mm 

Optimal working temp range: -20°c to + 80°c

The negative terminal is on the right, see images

* Please note specification can change at any time.

PACKAGE CONTENTS:

1x iTECH420CA S 12V Lithium Cranking Battery

2x adjustable foam spacers

1x independent test report

Pre-installed Battery Management System.

Find our whole range of lithium batteries here.

If your iTechworld battery enters safe mode, please follow the instructions HERE

The statutory warranty is 24 months from the date of purchase.