Battery Box 12v Camping Portable Deep Cycle Universal, Anderson, USB, Car Charge Port Adapters, Digital Meter, Isolation Switch. Upgraded thicker cable and 30Amp fuse.
Turn your 12v lithium battery into a user-friendly portable power station. With the iTechworld Battery Box, you can turn your deep cycle or lithium battery into a power station. The box can easily fit any deep cycle battery that measures 35cm x 18cm x 23cm or smaller and turn it into a portable power station. You can power up a lot of devices including 12v camping lights, 12v portable fridges or any other 12v device from its DC car socket and mobile phones or tablets with the two USB ports. The box itself can be charged using solar panels or any power source via its fast-connect Anderson plugs fitted with an upgraded 30amp inline blade fuse and thicker cables to cope. So you can put in up to a maximum of 25 amps via the Anderson connectors. The box is pre-wired with upgraded thicker cables, just connect your battery terminals and it's good to go. The box is strong and solid with a built-in voltage indicator, on-off switch and circuit breaker for ultra-safe use.
Please refer to the dimensions of the battery box and check to see if it will fit your deep-cycle battery before making your purchase.
Before using the iTechworld battery box, ensure the internal positive red cable is set to the desired position and tightened.
The battery box will arrive with the internal positive red cable nut finger tight to help with ease of installation.
Ensure this cable and both cables connected to the battery that you supply are fully tightened after the installation of a battery into the iTechworld battery box.
Failure to do so will cause the loose connection to get very hot and damage the battery box and or the battery.
1x iTechworld 12V Battery Box (upgraded)
The statutory warranty is 12 months from the date of purchase.
- Sturdy plastic case
- 2x Anderson connectors with 30A fuse (upgraded)
- Thicker than standard cable (upgraded)
- 2x USB ports
- External battery terminals
- Digital voltage indicator
- Isolation switch
- 10Amp reset-able circuit breaker
- Tie-down strap
- Lifting handles are fitted to ensure a secure hold when moving
- Fits any battery of 230mm H x 185mm W x 360 mm L or smaller
- External dimensions 280mm H x 265mm W x 440mm L