000AWG

Inverter Cable

450A Fuse

It's designed for high-power inverters, including pure sine wave and modified sine wave that require heavy-duty cabling up to 450A. Always check your inverter's maximum input rating.

Yes. The cable is constructed from thick, flexible, heat-resistant insulation suitable for automotive, 4WD, caravan and off-grid environments. While not submersible, it handles hot engine bays and outdoor exposure well.

The ANL fuse prevents excessive current flow, protecting both your battery and inverter from potential damage caused by short circuits or overloads.

The cable safely supports currents up to 450A, making it suitable for high-power inverter setups.

For many installations, 1 metre is adequate, especially for battery-to-inverter connections in a 4WD or caravan. Longer distances may require additional cable to maintain efficiency.

Ensure the M8 terminals are properly tightened to the inverter and battery posts. Use appropriate torque to avoid loose connections and ensure there is no fraying of the cable strands.

Basic tools are needed, including a wrench or socket for the M8 terminals. Crimping tools may be needed if cutting or modifying the cable.

Always disconnect the battery before installation, double-check polarity and ensure the fuse is in place. Avoid touching live terminals and confirm all connections are secure before powering up.

Yes. It can connect high-current solar banks to inverters. Ensure cable runs are as short as possible to minimise voltage drop and maintain fuse protection.

Exceeding the cable's current rating risks overheating, insulation damage or potential fire hazards. The 450A fuse helps mitigate risk but does not repalce proper sizing for your inverter.

000AWG is very thick compared to more common gauges like 2AWG or 4AWG. This low-resistance, high-capacity cable allows safe transmission of high currents, ensuring minimal voltage drop."