iTechworld
MC4 to Anderson Adapter Cable
7m 50A 8AWG
- Regular price
- $99
- Sale price
- $99
- Regular price
-
Australian Family Owned & Operated
Established in 2006, powering Aussies since.
LEGENDARY SUPPORT
Need help? Speak to an Aussie Power Expert.
Need Help Deciding?
Pickup not available
Overview
The iTechworld 7m MC4 to Anderson Adapter Cable connects any MC4-terminated solar panel or solar blanket to an Anderson-equipped power station, battery box or regulator, with 7 metres of reach.
That length is the whole point. On a caravan or camper trailer, the best patch of sun is rarely where the battery lives. Seven metres lets you chase the sun across a campsite, run a panel out from under the awning, or keep the panel in the open while the gear stays inside — without choosing your parking spot around the cable.
Long runs are where thin cable quietly costs you charge. This lead uses 8AWG conductors, more than double the copper of a standard 12AWG lead, so 7 metres of it drops about as much voltage as 3 metres of the lighter stuff. You get the reach without paying for it in charge current. The conductors are tinned copper rather than bare, which resists corrosion in coastal and humid conditions, and the cable is UV-stable and double-insulated for living outdoors.
Most panels come fitted with MC4 and most 12V camping gear takes an Anderson input, so this bridges the two directly — no adaptors stacked end to end, no cutting, no crimping. Click the MC4 pair onto your panel, plug the Anderson into your device, done.
The iTechworld 7m MC4 to Anderson Adapter Cable connects any MC4-terminated solar panel or solar blanket to an Anderson-equipped power station, battery box or regulator, with 7 metres of reach.
That length is the whole point. On a caravan or camper trailer, the best patch of sun is rarely where the battery lives. Seven metres lets you chase the sun across a campsite, run a panel out from under the awning, or keep the panel in the open while the gear stays inside — without choosing your parking spot around the cable.
Long runs are where thin cable quietly costs you charge. This lead uses 8AWG conductors, more than double the copper of a standard 12AWG lead, so 7 metres of it drops about as much voltage as 3 metres of the lighter stuff. You get the reach without paying for it in charge current. The conductors are tinned copper rather than bare, which resists corrosion in coastal and humid conditions, and the cable is UV-stable and double-insulated for living outdoors.
Most panels come fitted with MC4 and most 12V camping gear takes an Anderson input, so this bridges the two directly — no adaptors stacked end to end, no cutting, no crimping. Click the MC4 pair onto your panel, plug the Anderson into your device, done.
One thing to note: this is a straight extension lead, not a regulator. Your panel's output still needs to reach something that regulates it — a power station, DCDC charger or solar controller — rather than connecting straight to a battery.
Product Info
- Designed ForRunning an MC4 solar panel to an Anderson input
- Reach7 metres — park where you like, put the panel in the sun
- Cable8AWG tinned copper, over double the copper of a 12AWG lead
- Built For OutdoorsUV-stable, double-insulated, corrosion-resistant conductors
- Warranty24 months
| General | |
|---|---|
| Application: | Connects an MC4 solar panel to an Anderson input |
| Connector A: | MC4 pair (one male, one female) |
| Connector B: | 50A Anderson-style connector (grey) |
| Cable length: | 7m |
| Cable size: | 8AWG (approx. 8.4mm²) |
| Conductor: | Tinned copper |
| Insulation: | UV-stable, double-insulated |
| Anderson connector rating: | 50A |
| Warranty: | 24 months |
| SKU: | ITW-CBL-50AMC4-8-7M |
Buy now, Pay Later
Was price
The price this product was sold at on our site before the current price. Not a recommended or estimated price.
