Anderson Adapter

Cable

50A to 6.5mm

This Anderson plug adapter is designed to connect solar panels to your iTECH300P portable power station. It lets you charge the power station straight from solar, which is handy for camping, caravanning, or any off-grid setup where mains power isn’t available.

First, check that your solar panel uses a 50A Anderson connector. The Anderson plug adapter then converts that connection to the 6.5mm input used by the iTECH300P. As long as those connection types match, you’re good to go. If you’re unsure, a quick look at your panel’s plug type usually confirms it.

Very little. Keep the connectors clean and free from dust or corrosion, especially after beach or dusty trips. A quick wipe down and a visual check of the cable now and then is enough to keep your Anderson plug adapter working as it should.

It’s built for outdoor use and handles normal camping and travel conditions well. Still, like any electrical connection, it’s best to keep it out of standing water and protected during heavy rain where possible.

Simply plug the Anderson end into your solar panel lead and the 6.5mm connector into the power station input. Make sure both ends are firmly seated so you get a solid connection before placing your panel in the sun.

Start with the basics. Make sure the solar panel is in sunlight, all plugs are fully connected and there’s no dirt or damage on the connectors. If everything looks right and it still isn’t charging, the iTechworld support team in Australia can help you troubleshoot.