iTechworld

Off Grid System

10.24kWh

We are introducing our latest lithium deep cycle battery, the iTECH200. A massive 200 Amps of high-performance usable power coupled with the Redback™️ Lithium Operating System which ensures iTechworld's lithium battery range will outperform and outlast all others on the market. Designed specifically for use with inverters up to and including 3000W.

100% of the iTECH200's capacity is usable. The internal BMS allows 250A continuous discharge; other sub-standard lithium batteries have either no continuous discharge rating or a low continuous discharge rating of 50A - 100A. The iTECH200's internal BMS controls cell balancing, over and under-voltage protection, short circuit protection, thermal protection, and has over-discharge protection (safe mode).

The iTECH200 is the equivalent to 400Ah in lead-acid batteries (based on the standard depth of discharge of the iTECH200 (100%) and AGM battery (50%).

The iTECH200 weighs just 27kg. The equivalent lead-acid battery weighs 120+kg.

The iTECH200 deep cycle battery will charge up to 5x faster than a traditional lead-acid battery. The iTECH200 can charge from just about all existing chargers with no extensive modifications required to existing systems.

The iTECH200 can cycle up to 5000 times at 50% depth of discharge. AGM battery equivalents can cycle up to 500 times at a 50% depth of discharge. iTECH200 lithium battery systems have little to no self-discharge rate(≤2%). The battery pack can sit for long periods and will not go flat.

Our lithium batteries are designed and developed in Australia for use with caravans, camper trailers, motor homes, 4WD, boats, yachts, trucks and everything in-between. The iTECH200 will operate flawlessly in extreme heat and will handle heavy vibrations usually associated with corrugated roads.

Package Contents

• 1x Lithium Single Deep Cycle Battery iTECH200
• Pre-installed Redback™️ Lithium Operating System

Support

iTECH200 discharge curve and voltage chart HERE

If your iTechworld battery enters safe mode, please follow the instructions HERE

The statutory warranty is 36 months from the date of purchase.

Storage deep cycle battery only. It is not a cranking battery.

The iTECHBC40 40A AC Intelligent Battery Charger is a fully automatic "set and forget" charger. It has been designed and developed to charge Lithium LiFEPO4 batteries fast, efficient and effective, with unique algorithms that help maximise your battery's service life. The iTECHBC40 is a smart multistage battery charger that utilises the latest switch-mode battery charging technology, allowing your charger to be permanently connected to your battery bank.

The multistage charging algorithm delivers a fast, efficient and consistent charge with no voltage drop. Using charge algorithms that are tailor-made for Lithium LiFePO4 batteries, the iTECHBC40 not only charges the battery but looks after it. The iTECHBC40 is unlike any other battery charger on the market; with lithium LiFePO4 batteries as the focus, it will maximise and extend your battery's service life.

The iTECHBC40 has an innovative boost charge feature; this helps activate an iTechworld lithium battery from safe mode.

Designed and developed in Australia, the iTECHBC40 is built for the harsh Australian climate. The iTECHBC40 has a thermally cooling fan that automatically switches on and off based on the internal charger temperature to handle extreme conditions.

The iTECHBC40 battery charger uses a micro control system to manage the battery charging process.

Package Contents

• 1x iTechworld iTECHBC40 40A Battery Charger
• 1x Power lead
• 1x Set of 12v 800mm heavy duty battery leads with M8 eyelets/ring terminals
• 1x Instruction manual HERE

Support

The statutory warranty is 24 months from the date of purchase.

Download the user manual HERE

The iTECHBM500 is a high-precision battery monitor that captures instantaneous and integrated values in real-time. The iTECHBM500 utilises a 500A current shunt, the iTECHBM500 measures the discharge/ recharge currents and calculates the Ampere-hours (Ah) going in and out of the battery. The monitor provides real-time, high-precision voltage measurements through a field-installed sense wire. It is compatible with Lithium-ion, lead-acid, and nickel-metal hydride batteries.

Package Contents

• 1 x iTECHBM500 Battery Monitor
• 1 x Shielded wire (8m)
• 1 x 500 Amp Shunt
• 1 x Plastic bracket
• 4 x Screws
• 1 x Shunt holder
  
• 1 x B+ Sense wire 22AWG (1m)
• 1 x Instructions

Support

iTECHBM500 Wiring Diagram

Download the User Guide

The iTechworld RC3 PRO Intelligent On/Off Inverter Remote Control is perfect for caravans, motorhomes, campers, 4WDs and anywhere else you want easy access to your iTechworld PRO pure sine wave inverter.

This remote control is compatible with the Late 2024 Models 3000W PRO Pure Sine Wave Inverter with ATS and RCD and 2000W PRO Pure Sine Wave Inverter with ATS and RCD. A 5m extension cable is also available, giving you the flexibility to install your inverter wherever it’s most convenient while still being able to monitor and control its on/off function.

Installation is a breeze, with 4x screw holes on the outer casing the iTechworld inverter remote can be mounted anywhere desired.

PACKAGE CONTENTS

• RC3 PRO Remote Control
• 5m installation cable

For use with iTechworld pure sine wave inverters, please read your instruction manual to confirm what size fuse is suitable for you.

iTechworld 1000W/2000W pure sine wave inverter: 175Amp

iTechworld 2000W/4000W pure sine wave inverter: 250Amp

iTechworld 3000W/6000W pure sine wave inverter: 450Amp

Package contents

• 1x High current fuse holder

• 1x Fuse of your selected size

We are introducing our latest lithium deep cycle battery, the iTECH200. A massive 200 Amps of high-performance usable power coupled with the Redback™️ Lithium Operating System which ensures iTechworld's lithium battery range will outperform and outlast all others on the market. Designed specifically for use with inverters up to and including 3000W.

100% of the iTECH200's capacity is usable. The internal BMS allows 250A continuous discharge; other sub-standard lithium batteries have either no continuous discharge rating or a low continuous discharge rating of 50A - 100A. The iTECH200's internal BMS controls cell balancing, over and under-voltage protection, short circuit protection, thermal protection, and has over-discharge protection (safe mode).

The iTECH200 is the equivalent to 400Ah in lead-acid batteries (based on the standard depth of discharge of the iTECH200 (100%) and AGM battery (50%).

The iTECH200 weighs just 27kg. The equivalent lead-acid battery weighs 120+kg.

The iTECH200 deep cycle battery will charge up to 5x faster than a traditional lead-acid battery. The iTECH200 can charge from just about all existing chargers with no extensive modifications required to existing systems.

The iTECH200 can cycle up to 5000 times at 50% depth of discharge. AGM battery equivalents can cycle up to 500 times at a 50% depth of discharge. iTECH200 lithium battery systems have little to no self-discharge rate(≤2%). The battery pack can sit for long periods and will not go flat.

Our lithium batteries are designed and developed in Australia for use with caravans, camper trailers, motor homes, 4WD, boats, yachts, trucks and everything in-between. The iTECH200 will operate flawlessly in extreme heat and will handle heavy vibrations usually associated with corrugated roads.

Package Contents

• 1x Lithium Single Deep Cycle Battery iTECH200
• Pre-installed Redback™️ Lithium Operating System

Support

iTECH200 discharge curve and voltage chart HERE

If your iTechworld battery enters safe mode, please follow the instructions HERE

The statutory warranty is 36 months from the date of purchase.

Storage deep cycle battery only. It is not a cranking battery.

The iTECHBC40 40A AC Intelligent Battery Charger is a fully automatic "set and forget" charger. It has been designed and developed to charge Lithium LiFEPO4 batteries fast, efficient and effective, with unique algorithms that help maximise your battery's service life. The iTECHBC40 is a smart multistage battery charger that utilises the latest switch-mode battery charging technology, allowing your charger to be permanently connected to your battery bank.

The multistage charging algorithm delivers a fast, efficient and consistent charge with no voltage drop. Using charge algorithms that are tailor-made for Lithium LiFePO4 batteries, the iTECHBC40 not only charges the battery but looks after it. The iTECHBC40 is unlike any other battery charger on the market; with lithium LiFePO4 batteries as the focus, it will maximise and extend your battery's service life.

The iTECHBC40 has an innovative boost charge feature; this helps activate an iTechworld lithium battery from safe mode.

Designed and developed in Australia, the iTECHBC40 is built for the harsh Australian climate. The iTECHBC40 has a thermally cooling fan that automatically switches on and off based on the internal charger temperature to handle extreme conditions.

The iTECHBC40 battery charger uses a micro control system to manage the battery charging process.

Package Contents

• 1x iTechworld iTECHBC40 40A Battery Charger
• 1x Power lead
• 1x Set of 12v 800mm heavy duty battery leads with M8 eyelets/ring terminals
• 1x Instruction manual HERE

Support

The statutory warranty is 24 months from the date of purchase.

Download the user manual HERE

The iTechworld 40 Amp MPPT Solar Charge Controller is designed to enhance any solar and battery combination, it works especially well with iTechworld lithium batteries and iTechworld solar panels. With up to 99.5% tracking efficiency, the iTechworld 40A MPPT controller ensures maximum power point solar charging that gets more energy to your battery bank.

Designed and developed within Australia, the iTechworld 40A MPPT controller was built tough and to the highest quality for Australian conditions. With an innovative Australian specific charging algorithm patented by iTechworld, you will be able to extract the maximum available power from your solar panels.
The iTechworld 40 Amp MPPT Solar Charge Controller has a high-quality LCD display which is used to dynamically display the operation data and working status of the solar charge controller.

PACKAGE CONTENTS:

1x iTechworld 40 Amp MPPT solar charge controller

1x Instruction manual HERE

Our 27V 150W Hard Frame Solar Panels have proudly been designed and developed in Australia. Utilising HPX PRO technology, you can expect higher power per square meter, less energy loss due to shading and overall improved aesthetics.

Introducing our all-new 27V 150W Hard Frame Solar Panels, a product of Australian ingenuity and design. Crafted with precision and dedication, these solar panels are not just an energy solution but a testament to superior quality and innovation.

Proudly conceptualised and developed right here in Australia, ensuring top-notch quality and understanding of local needs.

The use of HPX PRO technology means you get more power per square metre. This advanced technology ensures minimal energy loss due to shading, maximising the efficiency of your panel.

Beyond its functionality, the solar panel boasts an improved aesthetic design, seamlessly attaching to your caravan or 4WD.

Whether you're hitting the road in your caravan or exploring off-beaten tracks in your 4WD, this solar panel is your reliable energy companion. Its design ensures optimal energy absorption, keeping your vehicles powered up during your adventures.

To help secure your solar panels, we offer easy-to-use mounting brackets, sold separately. These brackets are designed for hassle-free installation, ensuring your solar panels are securely mounted on your caravan or 4WD.

Please note: Solar Panel Mounting Brackets can be purchased here.

The iTECHBM500 is a high-precision battery monitor that captures instantaneous and integrated values in real-time. The iTECHBM500 utilises a 500A current shunt, the iTECHBM500 measures the discharge/ recharge currents and calculates the Ampere-hours (Ah) going in and out of the battery. The monitor provides real-time, high-precision voltage measurements through a field-installed sense wire. It is compatible with Lithium-ion, lead-acid, and nickel-metal hydride batteries.

Package Contents

• 1 x iTECHBM500 Battery Monitor
• 1 x Shielded wire (8m)
• 1 x 500 Amp Shunt
• 1 x Plastic bracket
• 4 x Screws
• 1 x Shunt holder
  
• 1 x B+ Sense wire 22AWG (1m)
• 1 x Instructions

Support

iTECHBM500 Wiring Diagram

Download the User Guide

The iTechworld RC3 PRO Intelligent On/Off Inverter Remote Control is perfect for caravans, motorhomes, campers, 4WDs and anywhere else you want easy access to your iTechworld PRO pure sine wave inverter.

This remote control is compatible with the Late 2024 Models 3000W PRO Pure Sine Wave Inverter with ATS and RCD and 2000W PRO Pure Sine Wave Inverter with ATS and RCD. A 5m extension cable is also available, giving you the flexibility to install your inverter wherever it’s most convenient while still being able to monitor and control its on/off function.

Installation is a breeze, with 4x screw holes on the outer casing the iTechworld inverter remote can be mounted anywhere desired.

PACKAGE CONTENTS

• RC3 PRO Remote Control
• 5m installation cable

For use with iTechworld pure sine wave inverters, please read your instruction manual to confirm what size fuse is suitable for you.

iTechworld 1000W/2000W pure sine wave inverter: 175Amp

iTechworld 2000W/4000W pure sine wave inverter: 250Amp

iTechworld 3000W/6000W pure sine wave inverter: 450Amp

Package contents

• 1x High current fuse holder

• 1x Fuse of your selected size

Designed specifically for our Hard Frame Solar Panel range, this bracket set offers a secure and reliable solution for fixed installations. Each pack includes four high-strength steel brackets with a black powder-coated finish, built to resist rust, corrosion, and wear in harsh outdoor conditions.

The brackets are designed to maintain consistent panel spacing, allowing airflow beneath the panel to aid in heat dissipation and improve long-term performance. Whether you're mounting panels on a shed, roof, ground frame or off-grid setup, these brackets offer the strength and durability needed for long-term performance.

Note: These are not compatible with our 6mm Hard Frame Solar Panels.

We are introducing our latest lithium deep cycle battery, the iTECH200. A massive 200 Amps of high-performance usable power coupled with the Redback™️ Lithium Operating System which ensures iTechworld's lithium battery range will outperform and outlast all others on the market. Designed specifically for use with inverters up to and including 3000W.

100% of the iTECH200's capacity is usable. The internal BMS allows 250A continuous discharge; other sub-standard lithium batteries have either no continuous discharge rating or a low continuous discharge rating of 50A - 100A. The iTECH200's internal BMS controls cell balancing, over and under-voltage protection, short circuit protection, thermal protection, and has over-discharge protection (safe mode).

The iTECH200 is the equivalent to 400Ah in lead-acid batteries (based on the standard depth of discharge of the iTECH200 (100%) and AGM battery (50%).

The iTECH200 weighs just 27kg. The equivalent lead-acid battery weighs 120+kg.

The iTECH200 deep cycle battery will charge up to 5x faster than a traditional lead-acid battery. The iTECH200 can charge from just about all existing chargers with no extensive modifications required to existing systems.

The iTECH200 can cycle up to 5000 times at 50% depth of discharge. AGM battery equivalents can cycle up to 500 times at a 50% depth of discharge. iTECH200 lithium battery systems have little to no self-discharge rate(≤2%). The battery pack can sit for long periods and will not go flat.

Our lithium batteries are designed and developed in Australia for use with caravans, camper trailers, motor homes, 4WD, boats, yachts, trucks and everything in-between. The iTECH200 will operate flawlessly in extreme heat and will handle heavy vibrations usually associated with corrugated roads.

Package Contents

• 1x Lithium Single Deep Cycle Battery iTECH200
• Pre-installed Redback™️ Lithium Operating System

Support

iTECH200 discharge curve and voltage chart HERE

If your iTechworld battery enters safe mode, please follow the instructions HERE

The statutory warranty is 36 months from the date of purchase.

Storage deep cycle battery only. It is not a cranking battery.

The iTECHBC40 40A AC Intelligent Battery Charger is a fully automatic "set and forget" charger. It has been designed and developed to charge Lithium LiFEPO4 batteries fast, efficient and effective, with unique algorithms that help maximise your battery's service life. The iTECHBC40 is a smart multistage battery charger that utilises the latest switch-mode battery charging technology, allowing your charger to be permanently connected to your battery bank.

The multistage charging algorithm delivers a fast, efficient and consistent charge with no voltage drop. Using charge algorithms that are tailor-made for Lithium LiFePO4 batteries, the iTECHBC40 not only charges the battery but looks after it. The iTECHBC40 is unlike any other battery charger on the market; with lithium LiFePO4 batteries as the focus, it will maximise and extend your battery's service life.

The iTECHBC40 has an innovative boost charge feature; this helps activate an iTechworld lithium battery from safe mode.

Designed and developed in Australia, the iTECHBC40 is built for the harsh Australian climate. The iTECHBC40 has a thermally cooling fan that automatically switches on and off based on the internal charger temperature to handle extreme conditions.

The iTECHBC40 battery charger uses a micro control system to manage the battery charging process.

Package Contents

• 1x iTechworld iTECHBC40 40A Battery Charger
• 1x Power lead
• 1x Set of 12v 800mm heavy duty battery leads with M8 eyelets/ring terminals
• 1x Instruction manual HERE

Support

The statutory warranty is 24 months from the date of purchase.

Download the user manual HERE

The iTechworld 40 Amp MPPT Solar Charge Controller is designed to enhance any solar and battery combination, it works especially well with iTechworld lithium batteries and iTechworld solar panels. With up to 99.5% tracking efficiency, the iTechworld 40A MPPT controller ensures maximum power point solar charging that gets more energy to your battery bank.

Designed and developed within Australia, the iTechworld 40A MPPT controller was built tough and to the highest quality for Australian conditions. With an innovative Australian specific charging algorithm patented by iTechworld, you will be able to extract the maximum available power from your solar panels.
The iTechworld 40 Amp MPPT Solar Charge Controller has a high-quality LCD display which is used to dynamically display the operation data and working status of the solar charge controller.

PACKAGE CONTENTS:

1x iTechworld 40 Amp MPPT solar charge controller

1x Instruction manual HERE

Our 27V 150W Hard Frame Solar Panels have proudly been designed and developed in Australia. Utilising HPX PRO technology, you can expect higher power per square meter, less energy loss due to shading and overall improved aesthetics.

Introducing our all-new 27V 150W Hard Frame Solar Panels, a product of Australian ingenuity and design. Crafted with precision and dedication, these solar panels are not just an energy solution but a testament to superior quality and innovation.

Proudly conceptualised and developed right here in Australia, ensuring top-notch quality and understanding of local needs.

The use of HPX PRO technology means you get more power per square metre. This advanced technology ensures minimal energy loss due to shading, maximising the efficiency of your panel.

Beyond its functionality, the solar panel boasts an improved aesthetic design, seamlessly attaching to your caravan or 4WD.

Whether you're hitting the road in your caravan or exploring off-beaten tracks in your 4WD, this solar panel is your reliable energy companion. Its design ensures optimal energy absorption, keeping your vehicles powered up during your adventures.

To help secure your solar panels, we offer easy-to-use mounting brackets, sold separately. These brackets are designed for hassle-free installation, ensuring your solar panels are securely mounted on your caravan or 4WD.

Please note: Solar Panel Mounting Brackets can be purchased here.

The iTECHBM500 is a high-precision battery monitor that captures instantaneous and integrated values in real-time. The iTECHBM500 utilises a 500A current shunt, the iTECHBM500 measures the discharge/ recharge currents and calculates the Ampere-hours (Ah) going in and out of the battery. The monitor provides real-time, high-precision voltage measurements through a field-installed sense wire. It is compatible with Lithium-ion, lead-acid, and nickel-metal hydride batteries.

Package Contents

• 1 x iTECHBM500 Battery Monitor
• 1 x Shielded wire (8m)
• 1 x 500 Amp Shunt
• 1 x Plastic bracket
• 4 x Screws
• 1 x Shunt holder
  
• 1 x B+ Sense wire 22AWG (1m)
• 1 x Instructions

Support

iTECHBM500 Wiring Diagram

Download the User Guide

The iTechworld RC3 PRO Intelligent On/Off Inverter Remote Control is perfect for caravans, motorhomes, campers, 4WDs and anywhere else you want easy access to your iTechworld PRO pure sine wave inverter.

This remote control is compatible with the Late 2024 Models 3000W PRO Pure Sine Wave Inverter with ATS and RCD and 2000W PRO Pure Sine Wave Inverter with ATS and RCD. A 5m extension cable is also available, giving you the flexibility to install your inverter wherever it’s most convenient while still being able to monitor and control its on/off function.

Installation is a breeze, with 4x screw holes on the outer casing the iTechworld inverter remote can be mounted anywhere desired.

PACKAGE CONTENTS

• RC3 PRO Remote Control
• 5m installation cable

For use with iTechworld pure sine wave inverters, please read your instruction manual to confirm what size fuse is suitable for you.

iTechworld 1000W/2000W pure sine wave inverter: 175Amp

iTechworld 2000W/4000W pure sine wave inverter: 250Amp

iTechworld 3000W/6000W pure sine wave inverter: 450Amp

Package contents

• 1x High current fuse holder

• 1x Fuse of your selected size

Designed specifically for our Hard Frame Solar Panel range, this bracket set offers a secure and reliable solution for fixed installations. Each pack includes four high-strength steel brackets with a black powder-coated finish, built to resist rust, corrosion, and wear in harsh outdoor conditions.

The brackets are designed to maintain consistent panel spacing, allowing airflow beneath the panel to aid in heat dissipation and improve long-term performance. Whether you're mounting panels on a shed, roof, ground frame or off-grid setup, these brackets offer the strength and durability needed for long-term performance.

Note: These are not compatible with our 6mm Hard Frame Solar Panels.