12 Volt Battery Systems
Finally an illustrated description of what it means to connect batteries in series or parallel.
We frequently get asked the question, "How am I supposed to connect my battery if I want to double the capacity but not the voltage?", or similar questions. It can be confusing if you've never done it, but hopefully this will make it simpler.
Connecting in series
When connecting your batteries in Series you are doubling the voltage while maintaining the same capacity rating (amp hours). Just use a jumper wire between the negative of the first battery and the positive of the second battery. Run your negative wire off of the open connector from the first battery and your positive off of the open connector on your second battery.
Connecting in Parallel
When connecting in Parallel you are doubling the capacity (amp hours) of the battery while maintaining the voltage of one of the individual batteries. Use a jumper wire between the positives of both batteries and another jumper wire between the negatives of both batteries. Connect your positive and negative wires to the same battery to run to your application.
Still not sure?
Call 08 9472 7200 to talk to an expert.