Frequently Asked Questions iTechworld Jump Starters

FAQ iTechworld Jump Starters

 

What jump starter do I need?

iTECH400A - Petrol cars, motorbikes, ride on mowers and outboard motors.

iTECH2000A - Petrol cars, motorbikes, ride on mowers, outboard motors and diesels up to 3L.

JS60 - Petrol cars, motorbikes, ride on mowers, outboard motors and diesels up to 4.5L.

JS80 - Petrol cars, motorbikes, ride on mowers, outboard motors and diesels up to 8L.

Will an iTechworld jump starter run my 12v fridge?

Yes, an iTechworld jump starter can run most 12v fridges. Some fridges that draw over 10amps may not run on an iTechworld jump starter. All run times supplied by iTechworld are based off running an engel 40L fridge set at 2 degrees already at temperature.

iTECH400A - 1 hour

iTECH2000A - 3 hours

JS60 - 3 hours

JS80 - 7 hours

Please note, the run times listed above is a rough and approximate guide, the run time you get may vary depending on the brand of fridge you have, its current consumption, its age, the ambient temperature and various other factors. Although an iTechworld jump starter can run a fridge, it is not its primary function.

Do any of your jump starters have a regulated 12v output?

Yes, the JS80 has regulated 12v output. A regulated 12v output means that the 12v socket will always hold at 12v even as the state of charge of the battery depletes, this ensures a longer run time on 12v appliances such as fridges.

Will an iTechworld jump starter charge my mobile devices?

Yes, all iTechworld jump starters come with USB ports to charge mobile devices. The JS80 supports USBC PD input and output.

Will an iTechworld jump starer run my CPAP machine?

The only iTechworld jump starter that is capable of running a CPAP machine is the JS80. Please note that only 12v direct CPAP machines are compatible for use with the JS80. If you require your humidifier to be on whilst you sleep, a jump starter may not be the correct choice as your primary power source for your CPAP machine. Please always check the specifications of your CPAP machine before purchasing a vehicle jump starter to power it. We are always happy to help with working out the specifications of your CPAP machine. Please email sales@itechworld.com.au.

Can an iTechworld jump starter bring an iTechworld lithium battery out of safe mode?

Yes, all iTechworld jump starters can bring an iTechworld lithium battery out of safe mode. please follow the battery management system instructions HERE

Do you have a waterproof jump starter?

Yes, the JS80 and JS60 are waterproof to an IP65 rating.

Do any of your jump starters support pass through charging?

Yes, the JS80 is the only jump starter in our range that supports pass through charging. Pass through charger allows you to charge the JS80 via 12v or 240v and at the same time you can run a 12v appliance such as a fridge or charge devices such as mobile phones.

Are your jump starters going to be safe with my vehicles computer?

Yes, an iTechworld jump starter is much safe than using traditional jumper leads. An iTechworld jump starter has various safety features such as:

    Over-current protection
    Short circuit protection
    Overload protection
    Over-voltage protection
    Over-charge protection
    Time out protection (30min)
    Over-temperature Protection
    Reverse polarity protection

    View all of our jump starter HERE

    Your question is not listed above? Please email service@itechworld.com.au